How to manually put the Refrigeration controller into Defrost mode from the controllers user interface

How to manually put the Refrigeration controller into Defrost mode from the controller itself:

Note* Using the guide attached follow the path given below

1. From in front of the controller press the right arrow until the screen reads “Manual”
2. Press enter
3. At this point it may ask for a 4 digit password.  Using the arrows, enter 2222 press and hold enter until screen changes. 
4. Press down arrow to “MANUAL DEFROST RELAY”
5. Press enter.
6. Press down arrow to “MANUAL ON”.
7. Press and hold enter until you hear the relay click.   You have not put the unit into defrost.
8. The unit will stay in defrost until you manually turn the relay back off.  Follow same process to return to standard operation.  This time select “MANUAL OFF”.